Electrical equipment assembly workshop with overhead cranes

Высоковольтный разъединитель

GN19 indoor disconnectors and outdoor pole-mounted disconnectors serve different installation paths. Compare cabinet fit, pole support, operating access and earthing interfaces before specifying the isolation point.

Electrical equipment assembly workshop

High-voltage disconnectors

Indoor GN19 and outdoor pole-mounted disconnectors

Review GN19 for an indoor cabinet and the pole-mounted type for an exposed line position. Each needs its own mounting, operating and insulation review before a quotation can be tied to a drawing.

Include the selected equipment and project drawings in your enquiry.
Include the selected equipment and project drawings in your enquiry.

Compare GN19 indoor and outdoor pole isolation

Both routes establish an isolation point. Compare their mounting, connections and operating access against the circuit and installation drawings for the selected unit.

Scroll horizontally to view all columns.

GN19 indoor and outdoor pole-mounted disconnector comparison
Review pointGN19 indoor cabinet routeOutdoor pole-mounted route
Installation positionFit the selected GN19 assembly within the switchgear panel and its specified isolation position.Position the selected assembly on the pole or support at the required line isolation point.
Mounting interfaceCheck panel space, mounting holes, phase centres and mechanism clearance on the cabinet drawing.Check support geometry, brackets, phase spacing and structural loads on the line layout.
ConnectionsMatch busbar and terminal positions to the panel’s incoming and outgoing conductors.Match line terminals and conductor approach to the crossarm or other support arrangement.
Insulation environmentReview electrical clearances and insulation coordination within the complete panel.State altitude, pollution and weather exposure for external insulation and clearances.
Operation and earthingCoordinate the cabinet operating mechanism, position indication, earthing and interlocks with the panel scheme.Define linkage, operator access and the line earthing procedure for the selected installation.
Approval documentsRequest the selected-unit drawing with panel outline, terminals and operating interface.Request the selected-unit drawing with support, conductor connections and operating route.

Indoor and outdoor isolation arrangements

Locate the isolation point in the cabinet or on the line structure. GN19 requires panel mounting and mechanism access; the outdoor route requires a support arrangement and operating path.

GN19 indoor disconnector reference showing contact blades and gray insulating supports
GN19 contact blades and insulating supports

GN19 indoor cabinet mounting

The contact blades, insulating supports and operating linkage form an indoor isolation point within the specified switchgear panel.

Panel interface

Set phase centers, mounting holes, busbar terminals and mechanism access against the cabinet drawings.

Operating scheme

Coordinate the shaft, isolation indication, earthing switch and panel interlocks with the selected assembly.

Installation and selection checks
  • Provide the panel outline, busbar layout and connection drawing.
  • Confirm operating access and the mechanical interface.
  • Define isolation, earthing and interlock responsibilities.
  • Check clearances and the complete selected-unit designation.
Outdoor disconnector series example with angled brown insulators and red contact heads
Outdoor support and insulator arrangement

Pole-mounted line isolation

An outdoor disconnector needs conductor terminals, insulating supports and an operating path that fit the pole or structure.

Structure interface

Match the support arrangement, phase spacing and conductor approach to the crossarm or other installation drawing.

Operating scheme

Define the drive linkage, ground-level access and isolation procedure for the selected configuration.

Installation and selection checks
  • Provide the line structure and conductor connection drawings.
  • State altitude, pollution and weather conditions for insulation review.
  • Confirm support loads, linkage route and safe operating access.
  • State the required voltage, continuous current and support arrangement.

Specify the isolation point with the circuit

Start with the single-line diagram and operating scheme. Define what must be isolated, which device interrupts the circuit, and how the selected disconnector fits the installation.

These records establish the isolation duty and the interfaces that a proposed indoor or outdoor unit must meet.

Define the isolation boundary

Mark the equipment or line section to be separated, the required open position and the operating sequence on the single-line diagram.

Assign interruption duties

Specify a breaker or other device rated for the required load and fault interruption. An ordinary disconnector is selected for isolation.

Match installation interfaces

For GN19, check cabinet space, terminals and operating linkage. For the outdoor form, check support, line approach, insulation environment and access.

Verify the quoted configuration

Review the selected unit’s rated data, short-time and peak withstand duty, dimensions, position indication, earthing and interlock interfaces against its drawings.

Start with the circuit documents.

  • Single-line diagram and isolation point
  • Load and fault interruption scheme
  • Cabinet drawing or pole layout
  • Operating, earthing and interlock plan

State rated voltage and continuous current alongside the required insulation, short-time withstand and peak withstand duty.

Withstand ratings describe a device’s ability to survive a specified fault condition; they do not establish load or fault breaking capability.

Information for a disconnector quotation

Give the isolation duty, indoor or outdoor installation and equipment interfaces together. Mark fixed requirements and any decisions still open.

A single-line diagram, cabinet drawing or pole layout, operating scheme and replacement-unit measurements help define the request. Attach the latest available documents.

Electrical duty

System and continuous current
State maximum system voltage, frequency and the continuous current at the isolation point.
Insulation and withstand
Give prescribed insulation levels, short-time and peak withstand requirements, and the fault-duration basis.

Isolation and operation

Isolation and interruption scheme
Mark the isolation point, adjacent breaker or other rated interrupting device, and the approved operating sequence.
Operating interfaces
Identify the drive arrangement, operator access, position indication, earthing and interlock requirements.

Installation and connections

Cabinet or pole mounting
For GN19, give panel space and mounting details. For outdoor units, give support geometry, phase spacing and conductor approach.
Site and terminals
State ambient conditions, altitude and pollution or weather exposure. Show terminal positions and busbar or line connections.

Documents and supply

Drawings and test records
List the selected-unit drawing, rated-data sheet and test records required for project review.
Quantity and delivery scope
State quantity, destination, delivery needs and which supports, linkages and accessories to quote.

Disconnector installation contexts

Review the cabinet, line structure or existing equipment interface together with the isolation duty and operating scheme.

Illustrative indoor distribution room with separate medium-voltage and low-voltage cabinet lineups

Isolation in indoor switchgear

A GN19 disconnector forms an isolation point within the specified indoor panel. Its contacts, supports and drive must fit the surrounding cabinet equipment.

Review panel space, phase centers, busbar terminals, operating access and the cabinet’s isolation, earthing and interlock scheme.

Illustrative rural overhead distribution feeder with pole-mounted electrical apparatus

Isolation on an outdoor line

An outdoor disconnector connects to the conductors and support structure at the planned isolation point. The support geometry and operating route are installation requirements.

Confirm conductor approach, phase spacing, support loads, insulation conditions, linkage clearance and operating access. Coordinate interruption duty with the rated interrupting equipment.

Illustrative engineering bench with interface drawings and measuring tools beside electrical cabinets

Replacing an existing disconnector

A replacement must meet the existing unit’s electrical duty and installation interfaces. A matching series name alone does not establish interchangeability.

Provide the nameplate, mounting dimensions, phase centers, terminal positions and mechanism details. Check the quoted unit against the existing cabinet or line layout.

Illustrative application environments.

Questions about disconnectors

Isolation duty, indoor or outdoor mounting, operation and replacement interfaces.

Review the selected unit’s electrical schedule and installation drawings with the project requirements.

Can a disconnector replace a circuit breaker?

A disconnector provides an isolation point. Load or fault interruption requires equipment rated for that duty. Identify the adjacent interrupting device and approved operating scheme when specifying the disconnector.

How do I choose between GN19 and the outdoor route?

Start with the installation environment and isolation point. GN19 is reviewed against an indoor panel drawing; the outdoor route is reviewed against its pole or structure layout. Check ratings, insulation, mounting and operating interfaces for the selected unit.

Which interfaces determine replacement fit?

Match the complete model, mounting dimensions, phase centers, terminals and mechanism to the existing cabinet or line installation. Compare the replacement outline and operating drawings with those interfaces.

Which electrical duties should the request state?

Provide system voltage, frequency, continuous current, prescribed insulation levels, short-time and peak withstand requirements, and the fault-duration basis. Withstand duty does not establish load or fault interruption capability.

Which operating and earthing details should the enquiry include?

Define the operating drive, access, position indication and required earthing and interlock scheme. Identify which devices, linkages and supports belong in the quoted package, then review them on the selected assembly drawings.

Which documents help prepare a quotation?

Send the single-line diagram, required ratings, cabinet or pole layout, operating scheme and quantity. For a replacement, include the nameplate and interface measurements. State the data sheet, drawings and test records needed for project review.

Switchgear Isolation & Selection Guides

View all resources